User's Manual

STUN_SERVER_PORT2[port_number] This parameter is the port number used
corresponding toSTUN_SERVER_IP2. The
default port number is 3478.
- port_number– is the port number.
VQMon configuration commands
Important:
Ensure you read How VQMon works on page 130 before configuring the VQMON
parameters.
VQMON_PUBLISH [YES |
NO]
This parameter enables or disables the publish message
containing the voice quality monitoring metrics sent to the
Proactive Voice Quality Monitoring (PVQMoN) collecting
server. The default value is NO.
- YES – enables VQMoN.
- NO – disables VQMoN.
VQMON_PUBLISH_IP
[xxx.xxx.xxx.xxx]
This parameter configures the IP address of the PVQMoN
server that collects voice quality monitoring metrics from the
publish message.
This IP address is used only within the report.
LISTENING_R_ENABLE
[YES | NO]
This parameter enables or disables the alerts based on the
Listening R Minor and Major Thresholds. The default value is
vocoder-dependent, using a scale from 1 (lowest quality) to
100 (highest quality). Currently, default values are used based
on VOCODER on a per-call basis as summarized below.
- YES – enables the sending of the alert report based on the
Listening R Value.
- NO – disables the sending of the alert report based on the
Listening R Value.
VOCODER_G711_ULAW
VOCODER_G71
1_ULAWP
LP
LISTENING_R_WARN = 80
LISTENING_R_EXCE = 70
VOCODER_G723
VOCODER_FLAG_G723_
RATE_53
LISTENING_R_WARN = 60
LISTENING_R_EXCE = 50
Configure the provisioning server
88 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]