User's Manual

- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
FASTBUSY_TONE
[frequency1 | frequency2
| on_time | off_time]
This parameter selects the tone advising the caller that the
telephone number is busy. It is fast in cadence or frequency. You
can select the country-specific tone. The default tone is the North
American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
CONGESTION_TONE
[frequency1 | frequency2
| on_time | off_time]
This parameter selects the tone advising the caller that the
groups of lines or switching equipment necessary for setting up
the required call, or for the use of a specific service, are
temporarily engaged.
You can select the country-specific tone.
The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
The IP Deskphone supports using WAV files to replace the
ringtone Frequency/Cadence pattern. For a system-wide setting,
the country default values can be used.
NAT configuration commands
NAT_SIGNALLING [NONE | SIP_PING |
STUN]
This parameter indicates the type of protocol
used for NAT traversal in the signaling port. The
IP Deskphone supports two methods of NAT
traversal of the signaling path: SIP_PING and
STUN.
- NONE – if the value is not configured as None,
this parameter overrides the value of the
Configure the provisioning server
86 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]