User's Manual

value is retrieved from the Service Package. The
default value is 18.
- x –– a value from -1 to 63 indicating the DSCP
value.
Tone configuration commands
DIAL_TONE [frequency1 |
frequency2 | on_time |
off_time]
This parameter selects the tone advising the caller that the
exchange is ready to receive call information and invites the user
to start sending call information.
You can select the country-
specific tone. The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
For example, 350,440;-1 (350 and 440 Hz continuous tone).
RINGING_TONE
[frequency1 | frequency2
| on_time | off_time]
This parameter selects the tone advising the caller that a
connection is made and a calling signal is applied to a telephone
number or service point. You can select the country-specific tone.
The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
For example, 440,480; 2000,4000 (440 and 480 Hz with 2
seconds on, 4 seconds off)
BUSY_TONE [frequency1
| frequency2 | on_time |
off_time]
This parameter selects the tone advising the caller that the
telephone number is busy
. You can select the country-specific
tone. The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
Tone configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 85