User's Manual

- YES – initial login and logout is alphanumeric.
- NO – initial login and logout is numeric (default).
FIPS_MODE [YES | NO] FIPS mode is used in a Federal environment. This
parameter verifies that the IP Deskphone is in
Federal Information Processing Standards (FIPS)
certified mode.
ENABLE_ANSWER_MODE [YES | NO] This parameter allows the administrator to specify if
Answer-Mode is supported when registering with
the proxy. The default value is NO.
- YES - the Answer-Mode is allowed. The IP
Deskphone adds the "answermode" tag to the
Support header in the REGISTER request.
- NO - the Answer-Mode is not supported
(default).
ANSWER_MODE_MAXALLOWADDR
[max_addr]
This parameter specifies the maximum number of
addresses that can be white-listed for
Answer-Mode
support.
The allowed values are from 0 to 200. The default
value is 100.
• max_addr - maximum number of addresses
ANSWER_MODE_MICMUTE [YES |
NO]
This parameter specifies if the microphone is muted
when a call is auto-answered by the Answer-Mode
functionality.
- YES - mute the microphone
- NO - do not mute the microphone (default value)
QoS and ToS commands
AVAYA_AUTOMATIC_QoS
[YES | NO]
This parameter provides a better treatment for signaling and
media packets after you deploy the IP
Deskphones with the
Avaya switches. All the devices use private Differentiated
Services Code Point (DSCP) values to give better treatment
to the traffic coming from peer Avaya devices.
Configure the provisioning server
82 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]