User's Manual

DISABLE_SPKRPHN [YES | NO] This parameter disables the speakerphone for all
non-911 calls. This is intended for DoD. The default
value is NO.
- YES– disables the speakerphone.
- NO – enables the speakerphone .
CALL_ORIGIN_BUSY [YES |NO] This parameter determines if the user is presented
with an incoming call when entering the address of
an outbound call.
This is intended for DoD. The
default value is NO.
- YES– user is not presented with an incoming
call .
- NO – user is presented with an incoming call
(default).
FAST_EARLY_MEDIA_ENABLE [YES|
NO]
This parameter allows the administrator to activate
and deactivate the Fast Early Media option
(according to RFC 3264).
The default value is NO.
- YES - activate the Fast Early Media option
- NO - deactivate the Fast Early Media option
SLOW_START_200OK [YES |NO] This parameter determines if the session
description is always sent in the 200 OK message
in response to an incoming call with SDP. The
default value is NO.
- YES – local administration UI is configured.
- NO – local administration UI is not configured
(default).
ENABLE_LOCAL_ADMIN_UI [YES |
NO]
This parameter configures the availability of the
local administration User Interface (UI) on the IP
Deskphone. The default value is YES.
- YES – local administration UI is configured
(default).
- NO – local administration UI is not configured.
LOGINALPHA_ENABLE [YES | NO] This parameter allows the system administrator to
configure the initial login and logout of the IP
Deskphone to be in either alphanumeric mode or
numeric mode. The default is NO.
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 81