User's Manual

• label_string - label characters. Maximum length of
the string is 6 alpha-numerics characters.
Note:
TECH_SUPPORT_ADDRESS parameter is
defined.
TECH_SUPPORT_ADDRESS
[addr_string]
This parameter configures the URI of the
Technical.Support service. If the IP Deskphone
licensing verification fails, then special dialog
appears where the IP Deskphone user can press
the Support soft key to call to the Technical Support
service (see the preceding command
TECH_SUPPORT_LABEL).
The default value is [e-mail].
DOD_ENABLE [YES | NO] This parameter identifies whether it is a DoD ARTS
network. The default value is NO.
- YES – Call Forwarding Reminder service
subscribes to its own dialog event.
- NO – Call Forwarding Reminder service
subscribes to network-redirection-reminder event
package.
MLPP_NETWORK_DOMAIN [DSN] This parameter is the network domain (DSN) of the
user to be added to the INVITE message of
outgoing calls. The default value is DSN.
MLPP_PRECEDENCE_DOMAIN [x] This parameter is the local precedence domain of
the user to be added to the INVITE message of
outgoing calls. The default value is 000000.
MAX_APPEARANCES [x] This parameter determines the maximum number
of call appearances that a user can have. The
maximum is 10. The default is 2. DoD requirement
is a maximum of 2.
- x – number of call appearances between 1 and
10.
CALL_WAITING_TONE [0|1] This parameter configures the call waiting tone. The
default value is 0.
- 0 – single buzz tone (default).
- 1 – two-beep periodic tone.
Configure the provisioning server
80 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]