User's Manual

CONFERENCE_URI1 [e-mail]. This is
the address of the conference server when the user
attempts to make a conference call. The default is
[e-mail]. If a service package is used
then this is provided by the service package.
- x – the SIP domain number from 1 to 5
- URI – the address of the conference server
ADHOC_ENABLED [x] [YES | NO] This parameter configures support for ad hoc
conferencing for the Call Server
. The default value is
NO. If a service package is used, then this is provided
by the service package.
- x – the SIP domain number from 1 to 5.
- YES – the call server supports ad hoc
conferencing.
- NO – the call server does not support ad hoc
conferencing.
MAX_ADHOC_PORTS[x]
[max_ports_number]
This parameter configures the maximum number of
adhoc conference participants that can join the
conference on the IP Deskphone. The default value is
0.
- x – the SIP domain number from 1 to 5
- max_ports_number - number of participants from 0
to 4. The default value is 0.
INTERCOM_PAGING [YES | NO] This parameter allows the IP Deskphone to belong
to a paging group. When a page group call is
received, a one-way speech path is created to the
IP Deskphone, and the IP Deskphone automatically
goes to a handsfree intercom state. This is used
with the SCS proxy. The default value is NO.
- YES – intercom/paging functionality is enabled.
- NO – intercom/paging functionality is disabled
(default).
LOGOUT_WITHOUT_PASSWORD
[YES | NO]
This parameter allows the user to log off without
entering their password if the administrator enables
LOGOUT_WITHOUT_PASSWORD feature. If
USE_AUTOLOGIN_ID is used then the user is not
able to log out of the IP Deskphone. The default
value is NO.
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 65