User's Manual

defined in the IP Deskphone-specific configuration

file.

Note:

When using this setting, the user is prevented from

logging off the IP Deskphone.

Note:

Autologin ID is enabled in the IP Deskphone-

specific configuration file, it is recommended that

AUTOLOGIN_ENABLE be configured as either

Yes/No or 1/0 in the device configuration file. This

recommendation facilitates migrating an

IP Deskphone that uses the IP Deskphone-specific

configuration file to not using the IP Deskphone-

specific configuration file. The migration to just

using the device configuration file can be done by

deleting the IP Deskphone-specific configuration

file. If the device configuration file does not have the

matching parameters in the IP Deskphone-specific

configuration file, the IP Deskphone continues to

use the previously assigned settings after the

IP Deskphone-specific configuration file is deleted.

This recommendation applies to other parameters

in the IP Deskphone-specific configuration file.

AUTO_UPDATE [YES | NO] This parameter is a command to enable or disable the

automatic updating of the IP

Deskphone with SIP

Software configuration files from the provisioning

server. Enabling this command causes the

IP Deskphone with SIP Software to check for updates

once every day. The default is disabled.

- YES – turns on the AUTO_UPDATE feature.

- NO – turns off the AUTO_UPDATE feature.

Note:

If the IP

Deskphone encounters any Major or Critical

error in memory during the Auto update process, the

IP Deskphone reboots based on the recovery level

set.

AUTO_UPDATE_TIME [x] This parameter is the actual time in seconds, starting

from midnight, before an automatic update occurs.

Each IP Deskphone adds random numbers to the time

specified by this command so every IP Deskphone

Feature configuration commands

SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 53