User's Manual

and the start of dialing the voice mail user ID. The
default value is 1000ms.
- x – the delay in milliseconds
LLDP_WAITING_TIME
[timeout_sec]
This parameter allows the administrator to configure
the timeout in seconds the client should wait for the
LLDP response.
The allowed values of the parameter are from 30 to
300 seconds. The default value is 30 seconds.
— timeout_sec – timeout value in seconds
IP_OFFICE_ENABLE [YES | NO] This parameter is a command that specifies if IP
Of
fice-specific features are active on the IP
Deskphone or not. The default value is NO.
- YES – IP Office-specific features are active.
- NO – IP Office-specific features are not active.
IPOFFICE_CONF_CODE
[opt_string]
This parameter allows the administrator to configure
the Conf soft key. If the parameter is configured, the
IP Deskphone user is able to call the IP Office option
"Conference".
— opt_string = code of the Conference option
Example:IPOFFICE_CONF_CODE *3
Note:
The option is available if IP_OFFICE_ENABLE is
YES.
The code of the option is specified in the IP
Office
Administration Guide
IPOFFICE_MSG_CODE
[opt_string]
This parameter allows the administrator to configure
the Msgs soft key. If the parameter is configured, the
IP Deskphone user is able to call the IP Office option
"Send Message".
— opt_string = code of the Send Message option
Example:IPOFFICE_MSG_CODE *5
Note:
The option is available if IP_OFFICE_ENABLE is
YES.
The code of the option is specified in the IP
Office
Administration Guide
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 51