User's Manual

USE_RPORT [YES | NO]
- YES – allows the IP Deskphone to work from behind
and/or in front of a symmetrical NAT with servers
and/or clients that support RFC3581.
- NO – disables implementation of support for
RFC3581. This is the default option.
EXP_MODULE_ENABLE [YES | NO]
- YES – the IP Deskphone detects and enables an
expansion module.
-
NO – the IP Deskphone does not detect an
expansion module. This is the default option.
MAX_RING_TIME [x] This parameter is an n integer between 30 and 600
that configures the number of seconds for incoming
calls to ring before ignoring them. The default value is
120.
ENABLE_UPDATE [YES | NO]
- YES – enables UPDATE message support and adds
“UPDATE” to ALLOW header. This is the default
option.
- NO – disables UPDATE message support.
Note:
ENABLE_UPDATE is provisioned after user logoff.
PROMPT_ON_LOCATION_OTHER
[YES | NO]
- YES – prompt the user to select new location if
location “other” was previously selected.
- NO – do not prompt the user to select new location
if location “other” was previously selected. This is the
default option.
VMAIL [vmail_number] This parameter is the voice mail address, which can
be the URI or the DN number of the voice mail server.
This command takes a string as a parameter. This is
the default link for a new user profile only. Individual
users can customize the link through Prefs, Message
Options, Voice Mail Settings. This command has no
effect on the user profiles after it is created.
vmail_number is the number or URI of the voice mail
server.
VMAIL_DELAY[x] This parameter is a delay, configured in milliseconds,
between when the voice mail server answers the call
Configure the provisioning server
50 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]