User's Manual

- YES — the last IP address information is used if the
DHCP server is not reached.
- NO — Must receive a response to assign the IP
Deskphone an IP address (default).
PCPORT_ENABLE [YES | NO] This parameter enables/disables the PC port on the IP
Deskphone.
The default is YES.
- YES — PC port is active (default).
- NO — PC port is disabled.
LLDP_ENABLE [YES | NO] This parameter enables/disables LLDP on the IP
Deskphone. The default is NO.
- YES – 802.1ab (LLDP) is enabled.
- NO – 802.1ab (LLDP) is disabled (default).
Feature configuration commands
TOVM_SOFTKEY_ENABLE [YES |
NO]
This feature enables the transfer to voice mail feature
and displays a soft key on the IP
Deskphone. When a
user has an incoming call they can transfer the call
directly to their voice mail. This is supported on the
AS5200 and AS5300 servers.
- YES – enables the toVM soft key on the
IP Deskphone.
- NO – disables the toVM soft key on the
IP Deskphone.
TOVM_VOICEMAIL_ALIAS [string] This parameter customizes the user ID of the SIP URI
of the voice mail system. The default is transfertovm.
TOVM_VOICEMAIL_PARAM
[string]
This parameter customizes the parameter name of the
SIP URI of the voice mail system. The default is
mbid.
SCA_APPEARANCES [x] This parameter configures the maximum number of
appearances used for outgoing calls by the Shared
Call Appearance (SCA) group. The valid range for this
parameter is 2 to 24. The default value is 12.
SCA_HOLD_BEHAVIOR [PRIVATE |
PUBLIC]
This parameter configures the default behavior of the
hold button when user determined behavior does not
Configure the provisioning server
48 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]