User's Manual

- YES –IPv6 address is selected.
- NO –IPv4 address is selected.
IPV6_STATELESS [YES | NO] This parameter configures stateless autoconfiguration. If
IPV6_STATELESS parameter is configured to [YES],
then autoconfiguration is enabled. The default value is
YES. If this parameter is configured to [NO], then
addresses must be configured through manual or static
configuration.
- YES – enables IPv6 stateless autoconfiguration
(default).
- NO – disables IPv6 stateless autoconfiguration.
REGISTER_RETRY_TIME
[seconds]
This parameter configures in seconds how long the IP
Deskphone waits before it attempts to reregister with the
proxy server
. The default value is 30 (seconds).
- Minimum – 30 (seconds)
- Maximum – 1800 (seconds)
REGISTER_RETRY_MAXTIME
[seconds]
This parameter configures in seconds the maximum
value that the IP Deskphone waits before it attempts to
reregister with the proxy server. The default value is 1800
(seconds).
- Minimum – 600 (seconds)
- Maximum – 1800 (seconds)
SRTP_ENABLED [YES | NO] This parameter configures SFTP configuration values.
The default value is NO.
- YES – enables SRTP.
- NO – disables SRTP (default).
SRTP_MODE [BE-2MLines | BE-
Cap Neg | SecureOnly]
This parameter configures SFTP configuration values.
The default value is BE-2MLines.
- BE-2MLines (default)
- BE-Cap Neg
- SecureOnly
SRTP_CIPHER_1
[AES_CM_128_HMAC_SHA1_80
|
AES_CM_128_HMAC_SHA1_32]
This parameter configures the preferred order for SRTP
cipher offers. The default value is
AES_CM_128_HMAC_SHA1_80.
Configure the provisioning server
44 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]