User's Manual

The syntax of the device configuration file is case-sensitive. Verify that the commands entered
follow the case defined in this document.
Important:
Parameters in the device configuration file with empty values are not allowed and cause
write failure.
Important:
Some parameters are configured by the service package, which is downloaded to the IP
Deskphone at log-in time. Service packages are provided by CS 2000,
AS 5200, and AS
5300 proxies only.
Server and network configuration commands
SIP_DOMAIN[x] [domain_name] This parameter preconfigures the proxy domain name for
all servers.
The same configuration can be done through
the domain configuration menu on the IP Deskphone.
- x – the number of the SIP domain number from 1 to
5.
- domain_name – the proxy domain name for all
servers.
Note:
SIP_DOMAIN[x]
is provisioned after user logout.
SERVER_IP[x]_[y]_ip_address] This parameter configures the primary and secondary IP
address for each domain; two proxies for each domain.
-
x – the domain number from 1 to 5.
- y – the corresponding primary and secondary IP
addresses.
y=1 indicates the primary address and y=2 indicates
the secondary address.
- ip_address – the IP address of the SIP proxy server.
SERVER_PORT[x]_[y]
[port_number]
This parameter configures the signaling ports for each
proxy
.
- x – the domain number.
- y – the corresponding primary and secondary IP
addresses.
Server and network configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 41