User's Manual

Figure 83: Test key screen
After you activate the test mode, the key event appears on the screen:
•
Key pressing: "Test key: xx pressed"
•
Key pressing: "Test key: xx pressed"
The following table describes the function of the context-sensitive soft keys for the
Test key
screen.
Table 69: Context-sensitive soft keys for the Test key screen
Context-sensitive soft key Action
Quit Dismisses the Services menu.
The following table describes the function of the Navigation key for the Test key screen.
Table 70: Navigation
Key Action
Rls Closes the test mode and restarts the
IP
Deskphone.
Reset Factory Settings support
A
configured IP Deskphone can be reset to factory defaults to clear all stored information and
preference data. By activating this mode, the data stored on the IP Deskphone is erased, and
the administrator can reconfigure it for a new user.
The IP Deskphone resets data stored in the EEPROM to factory defaults and erases files in
TFFS.
There are two ways to activate Reset to Factory Settings:
Reset Factory Settings support
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 321