User's Manual

• [CTL]—this section is used to enable an IP
Deskphone to download the Certificate Trust
List, which is a list of trusted device certificates.
• [USER_KEYS]—this section is used to enable an IP Deskphone to download a customer
root certificate.
• [LOGIN_BANNER]—this section is used forto download a text file, the contents of which
are displayed on the IP Deskphone immediately after logging on.
• [USER_CONFIG]—this section is used to download device configuration files that are
unique to a particular IP Deskphone. This cause the IP Deskphone to look for
configuration files that are specific to the MAC address of the IP Deskphone.
If the IP Deskphone encounters a [USER_CONFIG] section while parsing the
1xxxeSIP.cfg configuration file, the IP Deskphone downloads the IP Deskphone-specific
configuration file SIP<mac id>.cfg.
IP Deskphone-specific configuration files support customizing the IP Deskphone on an
IP Deskphone//user level. Parameters in the device configuration file can be overwritten
with an IP Deskphone-specific configuration file.
Important:
If the 1xxxeSIP
.cfg configuration file contains a [USER_CONFIG] section, Avaya
recommends that DOWNLOAD_MODE be configured as FORCED. This is a global
setting for all IP Deskphones used to determine if the MAC ID file should be read.
Alternatively, if the user wants to use DOWNLOAD_MODE configured to AUTO, when
a change is made to any MAC ID file the version number should be incremented so
that all IP Deskphones read the file.
The following lists the mandatory key words in the provisioning file:
• VERSION [xxxxxx], where xxxxxx is a six- to ten-digit number representing the version
of the file on the server. The version of the module is specified in this field. The command
is used for version comparison in AUTO mode. VERSION is mandatory for all sections.
In the FW section, the software version of the load located on the provisioning server must
be entered in this field. For all other sections, VERSION is just a counter that can be
incremented if it is necessary to download a new file version.
Note:
The version number of the firmware [FW] can be longer
, up to 19 characters, and must
follow this format:
SIP1120e03.02.16.00
SIP1140e03.02.16.00
SIP1165e03.02.16.00
SIP12x0e03.02.16.00
Caution:
The version number is stored permanently on the IP
Deskphone until a higher version
number is downloaded. However, if the Forced option is in the 1xxxeSIP.cfg file, then
Configure the provisioning server
32 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]