User's Manual

Figure 56: EAP configuration menu
The administrator can do the following:
•
When MD5 is selected, the administrator is prompted to enter ID1 and Password.
• When PEAP is selected, the administrator is prompted to enter ID1, ID2 and Password.
If the administrator enters only ID1, then ID2 has the same value of ID1.
• When TLS is selected, the administrator is prompted to enter ID1.
Note:
Before using EAP-TLS a device certificate must be installed.
•
When Disable is selected, the existing IDs and passwords are erased.
The following is a list of additional provisioning file parameters for EAP support in addition to
the UI parameters on the Device Settings screen
Table 45: EAP Provisioning Parameters
Parameter Purpose Default Allowed
EAP EAP mode DISABLED DISABLED/MD5/
PEAP
EAPID1 Device ID1 Empty String (4 to 20
characters)
EAPID2 Device ID2 Empty String (4 to 20
characters)
EAPPWD Password Empty String (4 to 12
characters)
Certificate-based authentication
252 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]