User's Manual

Note:
Disabling the local administration user interface drastically reduces the ability to view or edit
the configuration of the IP Deskphone, and almost completely removes the ability to
diagnose any communication or configuration errors in the field. However, disabling the local
administration user interface increases the security of the IP Deskphone because the user
is not able to view the configurations or make changes.
Configuring the domain protocol
1. Press the Globe key twice.
2. Using the Navigation key cluster, select Server Settings..
3. Select a domain.
4. Enter the admin password (if the UI and password are enabled).
5. Use the Navigation key cluster to scroll through the Domain List screen and select
the required configured SIP domain.
6. Press the Edit context-sensitive soft key.
Table 31: Listening port parameters
Parameter name Description Default value Boundaries
SIP UDP Port The listening port on
the IP Deskphone for
incoming UDP
requests.
5060 Min: 1024
Max: 65535
Disabled: 0 (must be
non-zero for a TLS-
only option)
SIP TCP Port The listening port on
the IP Deskphone for
incoming TCP
requests.
5060 Min: 1024
Max: 65535
Disabled: 0 (must be
non-zero for a TLS-
only option)
SIP TLS Port The listening port on
the IP Deskphone for
incoming TLS
requests.
0 Min: 1024
Max: 65535
Disabled: 0 (must be
non-zero for a TLS-
only option)
Note:
The configuration of the IP
Deskphone for various protocols must be completed for outgoing
and incoming connections. For a complete TLS-only option, the outgoing server UDP and
TCP protocols must be configured as a non-zero value, and the incoming UDP and TCP
listening ports must be configured as a non-zero value.
Security
210 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]