User's Manual

Note:
The parameters affect the configurations of all the IP Deskphones.
Table 22: USB Port lock device configuration parameters
Commands Parameters Remarks
ENABLE_USB_PORT [YES|NO] If configured as No, all USB
devices are disabled and all
other USB device
configuration commands are
ignored.
USB_MOUSE [LOCK|UNLOCK] —
USB_KEYBOARD [LOCK|UNLOCK] —
USB_HEADSET [LOCK|UNLOCK} —
USB_MEMORY_STICK [LOCK|UNLOCK] —
To manually override the USB device setting on a particular IP Deskphone, in the USB Lock
menu, use the USB_LOCK_OVERRIDE command.
After you have configured the IP Deskphone to manually override the USB device setting, the
USB lock configurations from the device configuration file are ignored and the configurations
stored in the IP Deskphone are used. If you later decide to not allow manual override, you have
to access the IP Deskphone to reset it individually. The transition from enable
USB_LOCK_OVERRIDE to disable USB_LOCK_OVERRIDE triggers an optional restart in
order to reread the configurations from the device configuration file.
IP Deskphone information on USB devices
If the Enable USB Port is configured as NO then USB information does not display any USB
devices connected in the System > Phone Information USB Devices screen. The USB
information menu displays the information that the USB port is disabled.
The following is an example of the USB Devices information screen when the USB port is
disabled.
Features
166 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]