User's Manual

E911_TERMINATE_ENABLE
When enabled, the device configuration file command E91
1_TERMINATE_ENABLE allows a
caller who placed an emergency 911 call to terminate the call.
Revision history
November 2012 Standard 03.12. This document is up-issued to This document
is up-issued to remove references to Broadsoft.
April 2012 Standard 03.11. This document is up-issued to reflect re-
branding changes in the Configure the DHCP
Server section
and changes to technical content in the Server and Network
Configuration commands and IPDeskphone security
configuration sections.
March 2012 Standard 03.10. This document is up-issued for changes to the
Multiuser and Multiple Appearance Directory Number sections.
December 2011 Standard 03.09. This document is up-issued to reflect changes
in technical content for keep-alive parameter values.
December 2011 Standard 03.08. This document is up-issued to reflect changes
in technical content.
November 2011 Standard 03.07. This document is up-issued to reflect changes
in technical content for the keep-alive parameter, the Address
Book format, the removal of the SERVER_RETRIES parameter,
and trusted root certificate installation.
October 2011 Standard 03.06. This document is up-issued to reflect changes
in technical content for the inclusion of the
CACHED_IP_ENABLED and PCPORT_ENABLE provisioning
parameters in the “Server and network configuration
commands” section.
September 2011 Standard 03.05. This document is up-issued to reflect changes
in technical content for the inclusion of the
F
AIL_BACK_TO_PRIMARY configuration parameter.
August 2011 Standard 03.04. This document is up-issued to reflect changes
in technical content for Node lock licensing.
May 2011 Standard 03.03. This document is up-issued to reflect changes
in global power supply information and information on supported
languages.
New in this release
10 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]