User's Manual

DAP controller software 91

6 Define a range of IP addresses for the DAPs used, for example,

192.168.100.200 to 210.

7 Define the associated subnet mask, for example, 255.255.255.0.

8 Click Next.

The window New Scope Wizard—Exclusion of an IP address

range appears.

9 Enter the Start IP address and End IP address values to

exclude, for example, the IP addresses of DHCP server and the

TFTP server.

This is necessary only if the IP address or addresses of

equipment with a fixed IP address is within the DHCP address

range. If it is not within the DHCP address range, leave this field

blank.

10 If you entered IP address ranges in step 6, click Add to save the

exclusion list.

11 Click Next.

The Lease Duration window appears.

12 Set the desired lease duration of the granted IP addresses to the

desired value.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010