User's Manual

DAP controller software 87

If the IIS start page does not appear, continue to “Installing

IIS on PC with Windows XP” (page 85) and install IIS on your

computer.

If the IIS start page appears, IIS is installed and running. Close

the window and proceed to “DHCP and TFTP servers” (page

87).

--End--

DHCP and TFTP servers

Each DAP receives an IP addresses, configuration file and firmware from

the IP network using a DHCP server and a TFTP server. Choose whether

to use the Microsoft Windows DHCP server or the TFTP server or both, or

the built-in DAP controller DHCP and TFTP servers.

DHCP servers and TFTP servers are the network components of the

Microsoft Windows 2003 Server and the Microsoft Windows 2000 Server.

Install these servers as services for the SIP DECT system functions. For

more information about Microsoft Windows 2000, 2003 DHCP and TFTP

server installation and configuration, see “DHCP and TFTP servers” (page

87).

The DAP controller software Release 4 includes DHCP and TFTP

servers that you can configure from the IP DECT Configurator. For more

information about built-in DHCP and TFTP servers, see “Built-in DHCP

and TFTP servers” (page 97).

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010