User's Manual

System deployment 75

Estimated number of handsets for users

without wired telephones

Adjusted estimated number of handsets for

each cell

32 62

33 64

34 66

35 69

36 71

37 73

38 76

39 78

40 80

Procedure 25

Adjusting for users without wired telephones

Step Action

1 Count the number of user offices with handsets and wired

telephones (H&W), and record the number.

2 Count the number of user offices that have only wireless

handsets, (H).

3 Use Table 15 "Adjustment for users without wired telephones"

(page 74) to determine the equivalent number of H&W users and

record this number.

4 Add the numbers received from steps 1 and 3 to determine and

adjust the value for the number of users with wired telephones.

5 Use the first column of Table 15 "Adjustment for users without

wired telephones" (page 74) to determine if you must resize if the

cell as described in “Determining cell reengineering” (page 71) .

--End--

High handset density deployment

The high handset density deployment includes limiting the expected

number of handsets for each cell center.

Use the high handset density procedure if instructed to inTable 14 "Cell

reengineering" (page 72). Do not use more than one basestation for each

cell center.

Limit the anticipated number of handsets Limit the number of

handsets you anticipate for each cell center to the limits shown in Table 14

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010