User's Manual

50 Site planning and hardware deployment

4 until there you have sufficient Xs so you can draw a contour

arc around the cell center.

For an example of a cell boundary, see Figure 20 "Example of a

cell center boundary" (page 50).

--End--

Figure 20

Example of a cell center boundary

Mark and label the cell boundary.

Procedure 8

Marking and labeling the cell boundary on the ﬂoor plan

Step Action

1 Mark each office within the cell that is isolated from the office

area.

2 Label subsequent critical points on the floor plan with the

following symbol.

3 Mark the cell contour on the floor plan by tracing a contour line

through the Xs with a marker.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010