User's Manual

System deployment 47

Procedure 5

Demarcating the cell contour of the closest adjacent critical point to the ﬁrst

critical point.

Step Action

1 Repeat the described steps in Procedure 4 “Demarcating the cell

contour for the critical point farthest from the center of the full

coverage area” (page 45) to mark the cell contour of the closest

adjacent critical point to the first critical point.

In Figure 18 "Cell contour of the closest adjacent critical point

to the initial critical point" (page 47), P2 is the closest adjacent

critical point to the first critical point.

--End--

Figure 18

Cell contour of the closest adjacent critical point to the initial critical point

Locate the cell center.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010