User's Manual

278 External housing installation

Installing a C4710E basestation in an external housing with an

external antenna

Install a C4710E basestation in an external housing with an external

antenna.

Step Action

1 Unpack the C4710E basestation.

2 Open the cabinet of the basestation:

•

Remove the two screws at the rear side of the cabinet.

•

Separate the cover and the rear side from each other.

• The cabinet is held shut by four click parts, two on each long

side of the cabinet. If necessary, use a small screwdriver to

carefully open the click parts one at a time.

3 Drill two holes (10 mm in diameter) in the rear side of the

cabinet.

4 Connect the antenna cables to the connectors on the printed

circuit board. Secure the nuts with an SMA Torque Wrench.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010