User's Manual

If you have problems 245
• DAP firmware package:
• Central Directory access tool (if any):
Configuration
•
Single or multiple system (as selected during DAP controller software
installation):
• Simple or Routed Head Quarter, or MSMN:
• Microsoft Windows or built-in DHCP server:
•
Microsoft Windows or built-in TFTP server:
Numbering plan
• CDP or UDP:
•
TSC or LOC used for SIP DECT: SIPN configuration only
•
Number range for SIP DECT handsets:
•
Twinned configuration in use (yes or no):
• CallPilot in use (yes or no):
DAP information file
The DAP information file contains the main configuration parameters
for the current DAP; the Nortel help desk can use it for detailed access.
For more information, see Procedure 128 “Viewing DAP configuration
information” (page 219) for information about how to access the
information file.
System archive
The System archive contains important information about your SIP DECT
system; you can send it to the Nortel help desk if problems occur. For
more information, see “System archive” (page 209) to learn how to create
an archive.
The Nortel help desk may direct you to temporarily enable logging for
your SIP DECT system before you test a specific call scenario. For more
information, see steps 1 and 2 of Procedure 132 “Tracking a portable
device” (page 230). Enabling logging before testing a specific call scenario
adds extra information to the system archive.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.