User's Manual

214 System administration
After the update, the handset continues to use the old firmware
packet.
17 Click Remove Ready Handsets.
18 To activate the new firmware, restart the handset.
There are two options in restarting the handset.
• If the handset is in the charger, the handset automatically
restarts. No manual intervention is needed.
•
If the handset is not in the charger and you want to activate
the new software immediately, switch off the handset and
switch it on again. After the handset switches over to the new
firmware packet, the message "Firmware Update in progress.
Do not switch off." appears.
19 After the update, clean up the handsets list by using one of the
following options:
•
Remove Handsets
• Remove Ready Handsets
20 Click Statistics to view an overview of the all actions that occur.
A window appears.
--End--
Central directory access tool
The Central directory access tool connects a directory to the SIP DECT
system.
The Central Directory Access feature is available only for handsets that
support it.
After you install the Central directory access tool, the tool provides two
services that run under Windows. No user interface is available. TCP/IP
Port 30160 is open for external access from the IP DECT system.
IP DECT connects to the Central directory access tool through the TCP/IP
socket defined in the IP DECT Configurator tool.
For access to the database, the handset type must support access to the
database through the handset menu. If the handset menu does not offer
an option to access the Central Directory, you cannot use Central Directory
on that handset type. Consult your SIP DECT supplier to find the handset
types that support Central Directory dialling.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.