User's Manual

Branch Office configuration 181

Step Action

1 Perform one of the following steps:

If you were referred to this section from Procedure 90

“Configuring System Settings” (page 165), go to step 3.

Open the IP DECT Configurator, and click Modify.

2 Select the SIP DECT system that you are running, and click

System Configuration.

3 Choose Main Site with Branch Office(s) for System

configuration, as shown in the following figure.

4 Configure each branch office by entering the following

parameters:

• Subnet - the first address in the subnet range. For instance,

192.168.32.0.

• Subnet mask - mask to specify the subnet boundaries.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010