User's Manual

180 SIPL configuration
Table 33
LD 15: Enable message waiting indication
Prompt Response Description
REQ CHG
TYPE IMS IMS_DATA
CUST
n
n = customer number
...
IMS YES Enable IMS
...
Table 34
LD 15: Enable Message Center
Prompt Response Description
REQ CHG
TYPE FTR FTR_DATA
CUST
n
n = customer number
...
OPT MCI Message Center included
...
Branch Office configuration
Use Branch Office Configuration for a Large Campus network that is split
up into various (geographical) segments (branch offices), so that every
branch office has its own subnet and DAPs can exchange IP multicast
packets only using routers or switches in the subnet of their local branch
office. No IP multicast traffic is allowed between branch offices. In this
configuration each branch office behaves as an isolated part of a larger
SIP DECT system. Branch Office configuration supports seamless
handover within each branch office, but not between sites. Support is
unavailable for roaming between branch offices.
To configure Branch Office, see “Basic (simple) SIP DECT configuration
with CS 1000 SIP Line Gateway” (page 159). Use the information in this
section when you require information about Branch Office configuration.
Select a Branch Office configuration.
Procedure 101
Selecting a system configuration
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.