User's Manual

Basic (simple) SIP DECT configuration with CS 1000 SIP Line Gateway 163

3 In the General Settings window, enter the path to the firmware,

the DAP package file, for example, C:\tftpdroot\4910b427.dwl.

4 Click Apply.

--End--

Procedure 88

Conﬁguring IP Settings

Step Action

1 On the Settings pane, click IP Settings.

The IP Settings page appears.

2 In the Multicast address field, enter 239.192.49.49.

3 Enter the DAP controller Configuration: DC IP address,

which is the IP address of the PC where your DAP controller is

installed. An example of this address is 192.168.100.10.

4 Enter the Proxy IP address, which is the SIP LINE Gateway

Node IP address, for example, 192.168.100.105.

5 Click Apply.

--End--

Procedure 89

Conﬁguring Network Settings

Step Action

1 In the Settings pane, click Network Settings.

The IP DECT Configurator Network Settings window appears.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010