User's Manual

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 141
Prompt Response Description
TYPE UEXT Universal Extension
CUST
n
n = customer number
TN L s c u, for
example, 96 0 1
0
L = virtual superloop, s = shelf,
c = card, u = unit
UXTY SIPN UEXT subtype
DES
aaaa
Designator. Optionally, enter a description.
KEY 0 aaa yyyy, for
example,
0 SCR 5001
0 aaa yyyy = Primary UEXT DN:
•
aaa = MCN, MCR, SCN, or SCR
• yyyy = primary DN
1 HOT P nn yyyy,
for example,
1 HOT P 8
94425010
1 hot p nn yyyy = Target DN:
• nn = DN length (maximum length is 32)
• yyyy = <AC1+LOC+ subscribed DN on DAP>
Table 18
LD 11: Add universal extension (CDP)
Prompt Response Description
REQ NEW Add new extension
TYPE UEXT Universal Extension
CUST
n
n = customer number
TN L s c u, for
example, 96 0 1
0
L = virtual superloop, s = shelf,
c = card, u = unit
UXTY SIPN SIPN UEXT subtype
DES
aaaa
Designator. Optionally, enter a description.
KEY 0 aaa yyyy, for
example,
0 SCR 5001
0 aaa yyyy = Primary UEXT DN:
•
aaa = MCN, MCR, SCN, or SCR
• yyyy = primary DN
1 HOT P nn yyyy,
for example,
1 HOT P 6 445010
1 hot p nn yyyy = Target DN:
• nn = DN length (maximum length is 32)
• yyyy = <TSC+ subscribed DN on DAP>
Configuring CLID
Before you configure CLID, create a CPND block.
You can configure CLID using LD 95.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.