User's Manual

128 SIPN configuration

TN format: L s cu, where L = virtual superloop,

s = shelf, c = card, and u = unit.

13 Click Edit to configure Class of Service (CoS).

14 Select Digitone Dial Pulse (DTDP) for Dial Pulse.

15 Click Return Class of Service.

16 Select Advanced Trunk Configurations and select the Answer

and disconnect Supervision required (SUPN) check box.

17 Click Save.

--End--

Configuring network access

Configure network access using Element manager.

Procedure 62

Conﬁguring network access

Step Action

1 Select Dialing & Numbering Plans > Electronic Switched

Network from the menu.

2 Select Customer X > Network Control & Service > Network

Control Parameters (NCTL) > Network Control Basic

Parameters, and click Edit.

3 Click Submit.

--End--

Creating ESN control block

If the ESN control block is not configured, create an ESN control block by

using Element manager.

Procedure 63

Creating ESN Control Block

Step Action

1 On the ESN page, select Customer X > Network Control &

Service > ESN Access Code & Parameters (ESN).

The ESN Access Codes and the Basic Parameters page

appears.

2 Enter 10 for MXDM/MXRL/MXIX/MXFC/MXFS/MXLC/MXSC, 9

for AC1, 6 for ERDT, 0 for MXSD.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010