User's Manual

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 113
OR
• If you use a built-in DHCP server, see “Prerequisites” (page
98) .
ATTENTION
If you plan to create a configuration without DHCP and TFTP servers,
see “Configuration without DHCP or TFTP” (page 99).
5 Optionally, select the Monitor TFTP server check box to monitor
the TFTP activity of the built-in TFTP server.
The results appear in the System Status window, which appears
when you click Activate / Deactivate / System Status.
6 Optionally, select the Monitor DHCP server check box to
monitor the DHCP activity of the built-in DHCP server.
The results appear in the System Status window, which appears
when you click Activate / Deactivate / System Status.
--End--
Procedure 47
Configuring System Settings
Step Action
1 In the Settings pane, click System Configuration.
2 Choose one of the following:
•
To create a Basic (simple) configuration, select Simple
configuration, and click Apply.
• To create a Routed Head Quarter configuration, see
“Configure Routed Head Quarter” (page 147).
•
To create a Branch office configuration, see “Branch Office
configuration” (page 143).
•
To create a Routed Head Quarter with Branch office
configuration, see “Routed Head Quarter Configuration with
Branch Office” (page 148).
--End--
Procedure 48
Configuring SIP Settings
Step Action
1 In the Settings pane, click SIP Settings.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.