User's Manual

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 111

2 In the Multicast address field, enter 239.192.49.49.

3 Enter the DAP controller Configuration: DC IP address, which

is the IP address of the PC on which your DAP controller is

installed. An example of this address is 192.168.100.10.

ATTENTION

The DAP Controller PC must have a static IP address and be in the

same subnet as the DAPs. If the DAP Controller PC is in a different

subnet, you must configure the Routed Head Quarter. For more

information, see “Routed Head Quarter configuration” (page 146).

4 Enter the Proxy IP address, which is the Signaling Server Node

IP address, for example, 192.168.100.105.

5 Click Apply.

--End--

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010