User's Manual

107

SIPN conﬁguration

This section contains information about creating a SIPN configuration.

This is the SIP connection method used under Communication Server

Release 5.5.

Navigation

•

“Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway”

(page 107)

•

“Routed Head Quarter configuration” (page 146)

•

“Multi site mobility network configuration” (page 150)

•

“Central directory access tool” (page 214)

Basic (simple) SIP DECT conﬁguration with CS 1000 SIP Gateway

The SIP DECT system implies the configuration of three main

components: the Call Server, the Signaling Server, and the DAP controller

or manager, which is required to create, monitor, or modify the DAP

configurations.

Use the following tools to configure a SIP DECT system:

•

Element manager or overlay program for Call Server

•

Element manager and NRS manager for Signaling Server

• IP DECT Configurator and DAP manager IP DECT, which are available

as a part of the DAP controller software package

In this section, the following parameters are used as examples for the SIP

DECT system configuration:

• Call server IP address: 192.168.32.70

• Signaling server ELAN IP address: 192.168.32.41

• Signaling server Node IP address: 192.168.100.105

• Signaling server NRS IP address: 192.168.100.104

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010