User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya SIP DECT Fundamentals

101

102

103

104

105

106

107

108

109

110

DAP controller software 103

Prerequisites

• Install and configure IIS software.

For more information, see “Internet information services” (page 80).

•

Install and configure DHCP and TFTP servers if you use Microsoft

Windows DHCP and TFTP servers. For more information, see “DHCP

and TFTP servers” (page 87).

• Ensure that you have DAP controller or manager software Release 4

or later.

•

Ensure that you have DAP firmware 4910b427.dwl or later.

• Ensure that you have configured the IP addressing on the network

adaptor.

Procedure 42

Installing the DAP Controller

Step Action

1 Insert the CD-ROM in the CD drive, and run setup.exe.

Depending on the directory structure on the CD-ROM, the

setup.exe file is on Disk1.

The InstallShield Wizard appears. This window remains visible

while you install the DAP controller components and gives you

information about the installation progress.

2 If Microsoft .NET Framework 2.0 is already installed, the

Welcome to the InstallShield Wizard for DAP controller

window appears. Go to step 6.

If the Microsoft .NET Framework 2.0 software is not yet installed,

an Installshield dialog appears, with the following statement:

DAP Controller optionally uses the Microsoft (R)

.NET 2.0 Framework. Would you like to install it

now?

3 The Microsoft .NET Framework 1.1 Setup: End User License

Agreement page appears.

Click Yes to install Microsoft .NET Framework 2.0 software.

The Microsoft .NET Framework 2.0 Setup: End User License

Agreement page appears.

4 Click I agree, and then click Install.

The Microsoft .NET Framework 2.0 installs, and the Microsoft

.NET Framework 2.0 Setup: Setup Complete page appears.

Installation can take several minutes. The DAP controller -

InstallShield Wizard indicates activity with a progress bar.

5 Click OK.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 02.02 30 March 2010