User's Manual

4. In the General Settings window
, enter the path to the firmware, the DAP package
file; for example, C:\tftpdroot\4910b524.dwl.
5. Click Apply.
Configuring IP Settings
1. On the Settings pane, click IP Settings.
The IP Settings page appears.
2. In DAP Controller IP Configuration tab Enter the DAP controller Configuration:
DC IP address, which is the IP address of the PC where your DAP controller is
installed. An example of this address is 192.168.100.10.
3. In the Proxy IP Configuration tab enter the Proxy IP address, which is the SIP
LINE Gateway Node IP address; for example, 192.168.100.105, and Proxy port
number (5070 by default for SIP LINE)
4. Click Apply.
Configuring Network Settings
1. In the Settings pane, click Network Setting.
The IP DECT Configurator Network Settings window appears.
2. In Network card settings tab select the network card that is connected to the SIP
DECT system.
Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line Gateway
SIP DECT Fundamentals October 2012 95