User's Manual

6. Define a range of IP addresses for the DAPs used; for example, 192.168.100.200
to 210.
7.
Define the associated subnet mask; for example, 255.255.255.0.
8. Click Next.
The New Scope Wizard—Exclusion of an IP address range window appears.
9. Enter the Start IP address and End IP address values to exclude; for example,
the IP addresses of DHCP server and the TFTP server.
This is necessary only if the IP address or addresses of equipment with a fixed IP
address is within the DHCP address range. If it is not within the DHCP address
range, leave this field blank.
10. If you entered IP address ranges in step 6, click Add to save the exclusion list.
11. Click Next
The Lease Duration window appears.
12. Set the desired lease duration of the granted IP addresses to the desired value.
13. Click Next
The New Scope Wizard—Configure DHCP options window appears.
Software requirements
80 SIP DECT Fundamentals October 2012
Comments? [e-mail]