User's Manual

Cell contour arcs must pass near the cell boundary of adjacent cells. For an example,
see Figure 23: Example of deployment for cell center 1C2 on page 53
.
Figure 23: Example of deployment for cell center 1C2
Use the following procedure to mark cell contours, centers, and boundaries at the far end of
the intended coverage area.
Demarcating additional cell contours, centers and boundaries at the far end of
the building
Repeat the procedures Identifying critical points on the floor on page 45 toMarking and
labeling new critical points on page 52
as necessary to mark new cell boundaries at
System deployment
SIP DECT Fundamentals October 2012 53