User's Manual

12. Connect the Ethernet CA
T5 cable to the C4710E DAP. Place the DAP in the outdoor
cabinet and install the foam.
13. Connect the antenna cables to the antenna.
14.
Place the cover foam in position then place the antenna in the foam.
15. Close and lock the outdoor cabinet.
Important:
Ensure that the C4710E DAP
is line powered through the Ethernet cable. Local
power provision is not possible in this outdoor cabinet.
Mounting the cabinet on a wall
Mount the cabinet on a wall.
Install the external housing
232 SIP DECT Fundamentals October 2012
Comments? [e-mail]