User's Manual
Chapter 7: System maintenance
This chapter contains information to help you perform system maintenance, such as replacing DECT
Access Points (DAP) and managing DAP
synchronization.
Navigation
• DAP Web interface on page 147
• C4710 DAP LED indications on page 149
• Remove and replace a DAP (if a new DAP is available) on page 151
• Remove and replace a DAP (if a new DAP is not available) on page 152
• System synchronization analysis on page 153
• Export and import SIP DECT system on page 165
• DAP Controller deactivation on page 166
• Uninstalling DAP Controller software on page 167
• DAP Controller software update on page 168
• Troubleshooting on page
169
•
If you have problems on page 171
DAP Web interface
DAPs provide a W
eb interface. You can use the Web interface to view DAP data, and export
the DAP data to a file. However, you cannot change or modify the data using the Web
interface.
View DAP configuration information using the Web interface.
Viewing DAP configuration information
1. In an Internet browser, enter the DAP IP address in the address field; for example:
192.168.32.108. The General Settings page appears.
SIP DECT Fundamentals October 2012 147