User's Manual
Important:
If you use Reboot to restart a DAP, information about types and software versions
of subscribed handsets is lost, and is restored after several hours. You can
restore this information immediately using either of the following methods:
• Turn the handsets subscribed to the restarted DAP off, and then on again.
• Restart all DAPs using the option "Reboot all" in DAP Manager. For
information, see Restart all DAPs on page 131.
Restart all DAPs
Follow this procedure to restart all the DAPs in a system.
This can be required if you are
upgrading software, or if the DAPs are not functioning properly.
Restarting all the DAPs in a system
1. Open Internet Explorer and enter the following URL in the address field: localhost/
cds.
The DAP manager IP DECT page appears.
2. Click Access points.
The DECT Access Points page appears.
3. Click Reboot All.
Deleting a DAP
Follow this procedure to remove a DAP
that is damaged beyond repair.
Deleting a DAP
1. Open Internet Explorer and enter the following URL in the address field: localhost/
cds.
The DAP manager IP DECT page appears.
2. Select Subscriptions from the menu on the left in the DAP manager IP DECT
page.
The Subscriptions page appears.
3. Click Access points.
4. Select the DAP to delete.
5. Click Delete.
DAP management
SIP DECT Fundamentals October 2012 131