User's Manual
when it performs each subscribe operation; the PIN appears only when the
subscription status is Enabled.
Y
ou can enable up to 10 extension numbers for subscription at the same time.
Important:
If you plan to create a multi-site configuration, use the option Enable for multi-
site instead of Enable.
5. Using the handset you are subscribing, access the System configuration menu,
and choose New.
For information about accessing this menu, and other handset configuration
information, see the handset User Guide.
6. If the handset requests PARK code, enter thePARK code.
You can find the PARK code on the left at the bottom of the Subscriptions page. A
PARK code is required only if overlapping DECT systems exist in your location; if
only one DECT system is available in your location, you need not use a PARK
code.
7. Enter the displayed PIN code.
You must enter the PIN within 16 minutes; otherwise, the system terminates the
subscription mode for that extension number, and you must start the subscription
process from the beginning.
8. Enter the name of your SIP DECT system and the DN.
You can find the name of the system and the DN on the handset display. The status
of the configuring subscription record changes from Enabled to Subscribed.
Edit a subscription RPN
Follow this procedure to change the DAP
RPN to which the handset is subscribed.
Editing a subscription RPN
1. Open Internet Explorer and enter the following URL in the address field:
localhost/cds.
The DAP manager IP DECT page appears.
2. Select Subscriptions from the menu on the left in the DAP manager IP DECT
page.
The Subscriptions page appears.
3. Select the subscription to edit.
4. Click Edit.
System administration
124 SIP DECT Fundamentals October 2012
Comments? infodev@avaya.com