User's Manual

4. Click OK, and then Save in the File Download Page.
5. Enter the name of the file with exported subscriptions, navigate to the folder in which
to store the file, and click Save.
Importing subscriptions on remote systems
1.
Open localhost/cds in your Internet Browser (on DAP controller PC).
The DAP manager IP DECT page appears.
2. In the navigation menu, click Pack Up & Go.
3. Click Import.
4. Choose the appropriate file in the folder that stores files with subscriptions
5. Click OK.
Configuring Universal Extension on remote sites
Universal Extension (UEXT) redirects incoming calls to the DAP
. Key 0 corresponds with the
DN, configured on the DAP. Key 1 HOT U is the same number with a User agent DN prefix
configured for SIP Line.
Use LD 11 to configure UEXT.
Packages 139, 415, and 417 must be enabled on the Call Server.
Package 370 and DECT Visitor licenses are required for adding DECT visitors in MSMN
configuration.
Table 18: LD 11: Add universal extension
Prompt Response Description
REQ NEW Add new extension
TYPE UEXT Universal Extension
CUST n n = customer number
TN ls c u, for
example, 96 0 1 0
where l= virtual superloop, s = shelf,
c = card, u = unit
UXTY SIPL UEXT subtype
DES aaaa Designator. Optionally, enter a description.
SIPU xxxx SIP DECT user DN
NDID xxxx SIP Line Node ID of the current section
SCPW xxxx password configured in DAP Controller on the current
system (Configuring SIP Settings on page 96).
VSIT yes Vistor - enable MSMN support for SIP DECT user
Multiple-site mobility network configuration
SIP DECT Fundamentals October 2012 115