User's Manual

If you were referred to this procedure from Configuring System Settings on
page
96, click Apply, and continue configuring the SIP DECT system using
Configuring SIP Settings on page 96.
OR
Go to step 7.
7. Click Save System and deactivate the system.
8. Ensure that DHCP and TFTP servers are configured properly, so that DAPs can
start in all subnets.
9. Activate the system and restart all DAPs.
10. Start DAP Manager, open Access Points page and ensure that all DAPs are present
and working.
Routed Head Quarter Configuration with Branch Office
Routed Head Quarter Configuration with Branch Of
fice makes it possible to create Routed
Head Quarter configuration in one of the branch offices. Within the Branch Office with Routed
Head Quarte,r DAPs belong to various subnets and behave as a single site of one SIP DECT
system with the full support of seamless handover. As for the whole SIP DECT system, each
Branch Office (including the Branch Office with Routed Head Quarter) behaves as an isolated
site of that SIP DECT system. Branch Office configuration supports seamless handover within
Routed Head Quarter configuration
SIP DECT Fundamentals October 2012 111