User's Manual

time expires, IP DECT Configurator will be closed, but all services will be up and
running.
To stop the timer open any configuration tab.
Enabling or re-enabling the DAPs
To enable or re-enable the DAPs, start the DAPs.
DAP manager configuration
The following procedures are described in this section.
• Restarting DECT Access Points on page 103
• Adding number range on page 104
• Subscribing a DECT handset on page 104
Restarting DECT Access Points
Y
ou must restart the DECT Access Points (DAP) following software upgrades.
Restartng DECT Access Points
1. Start DAP manager by entering the following URL into an internet browser:
localhost/cds
The DAP manager IP DECT page appears.
2. Select Access Points from the menu on the left.
The Access Points page displays information about the DAPs.
DECT Access Points are identified by their Radio Part Number (RPN). In the DAP
Manager workspace, the status of the DAPs appear
. You can modify the RPN of a
DAP by editing the RPN field.
Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line Gateway
SIP DECT Fundamentals October 2012 103