Configuration Guide

Chapter 4 Configuring the R2MFC MBM 51
R2MFC Media Bay Module Installation and Configuration Guide
Figure 19 BCM E1 parameters configuration for R2MFC MBM
10 Select Modules on bus > Module 1 > Provision lines from the navigation tree. See Figure 20
on page 52.
The Bus # - Module # - E1 parameters Information frame displays.
11 Select an individual line that is displayed under the Provision lines heading. See Figure 20 on
page 52.
The Bus # - Module # - Line # information frame displays.
12 Select Provisioned from the Status drop-down list.
13 Repeat Steps 11 and 12 for every active B-channel that is provisioned for the corresponding
E1. There should be 30 channels, unless a partial E1 service is arranged with the CO.
See Figure 20 on page 52 for an example of the screen layout for an R2MFC MBM configured
on Bus 06.
Off