Configuration Guide

30 Chapter 2 Preparing to install the R2MFC MBM
N0027684 01
Environment checklist
The R2MFC MBM environmental requirements are covered by the host system environment
setup. See the BCM Installation and Maintenance guide supplied with the host system for details
of environmental requirements.
Electrical requirements
The R2MFC MBM power is supplied through the chassis on the host sytem. See the BCM
Installation and Maintenance guide supplied with the host system for details of the electrical
requirements.
Software requirements
R2MFC MBM firmware upgrades will be posted at www.nortel.com under Support & Training >
Technical Support > Software Downloads. Access this web site to see if there is a newer version
of firmware available than the firmware shipped on the R2MFC MBM. See “Upgrading firmware”
on page 63 for information on how to upgrade to the latest release of firmware.
Customer supplied hardware requirements
The following equipment is required to install of the R2MFC MBM:
• Computer with monitor and serial port for access to the CLI.
• E1 connection from local telephony service provider. Full description of the signaling
provided over the E1 by the CO.