User's Manual

Working with Groups
Issue 1 June 2010 79
9. From the Available list box, select the device(s) you want to add to the group, and then click
>. The selected devices appear in the Selected list box.
If you want to select all of the devices from the Available list box, click >>.
10. Click Next.
The system displays the Summary dialog box.
11. Click Next.
The static group is created, and the Finish Up dialog box appears.
12. Click Finish.
Creating a Dynamic Group
Before you can create a dynamic group, you must have already created static groups.
To create a dynamic group, perform the following steps:
1. From the Avaya Network Management Console window, select Tools > Avaya
Provisioning and Installation Manager For IPO Devices.
The system displays the Provisioning and Installation Manager window.
2. Click Groups at the top of the window.
The system displays the Select Group Type dialog box.
3. Select the Dynamic Group option button, and then click Next.
The system displays the General Information page.
4. In the Name field, enter the name for this group.
5. In the Notes field, enter any notes for this group.
6. Click Next.
The system displays the Query builder dialog box.
7. From the Group Name box in the first row, select the static group you want to use.
8. From the Condition box in the next row, select the condition you want to use to build the
dynamic group. Choices are:
-AND
- AND_NOT
-OR
9. From the Group Name box in the row, select the static group you want to use.
10. If you want to add another condition, click Add Row.
A new row appears.