User's Manual

Step 3: Configure the Access parameters for IP Office devices
Issue 1 June 2010 63
Step 2: Assigning users to IP Office devices
Perform the following steps:
1. Select Action > Assign Users to IP Office Devices.
The system displays the Assign IP Office Security Administration dialog box.
2. Select all of the IP Office devices running firmware 4.0.307 or later that you want to assign
to an IP Office user.
3. From the User Name field, select the user you just created in the previous section.
4. From the Select Action Type field, select Apply changes.
5. Click Apply.
Avaya Secure Access Administration will try to contact the IP Office devices and change the
TFTP password on each device and define a service user called AIMAdmin.
Note:
Note: The AIMAdmin password is common to all IP Office devices. You can change this
password from File > Options in Avaya Secure Access Administration.
6. Click Close.
7. Close Avaya Secure Access Administration.